RM SW V41c02 Final - Version History:
*************************************

Changes V41c02 Final  vs. V41b01 Final:
***************************************

-) RM now supports the extended Status message format of the new Dimming actuator. The following output states are supported: ON, Off, ON-locked, Off-locked, Blinking, Off-Overtemperature, Off-Overload - they are displayed as a combination of Status-text and Symbol. Due to limitation in the RM display only the output status of the extended status message is displayed.


Changes V41b01 Final  vs. V41a03 Final:
***************************************

-) Updated the internal RF-library with the latest optimizations

-) Optimized the Touch Sensor operation


Bugfixes/Changes V41a03 Final  vs. V40a Final:
**********************************************

-) The Room-Manager will no longer send out different time triggered events that will be activated at the same time immediately but add a short delay time of several seconds between these elements (Shadings, Room heating acutators, Timers,...)

-) Reduced the cyclic sending time of the Room 1 Set temperature to 30 minutes (from 6 hours) when the channel is connected to other devices (for example SHC)

-) RM now supports the extended Status message format of the new actuator generation. The following output states are supported: ON, Off, ON-locked, Off-locked, Blinking, Off-Overtemperature - they are displayed as a combination of Status-text and Symbol. Due to limitation in the RM display only the output status of the extended status message is displayed.

-) Output 1-10 of the Room-Manager will now always send out a RF-command to connected devices independent if the output already has the desired status (Mainly a change for Logic functions and Scenes to be able to always send out the desired output status if a change occurs).

-) The battery state page will now also display and track the battery state of the following inputs: Room 1 external temperature sensor, Operation type input, Heating valves of a room (sum of all valves per room -> if one has low battery the state is set to low)

-) Improved the detection of Touch sensor operations and RF-events to ensure a smoother and more reliable operation.

-) Corrected some display issues with the Bluetooth Room-Manager


Bugfixes/Changes V40a Final vs. V39b BB04 Final:
************************************************

-) RM will no longer send the 3rd repeat of a HRV-IN message to everyone to prevent learning an alternative path

-) Added a new Binary output channel for the Operation type (Heating/cooling) that can be connected to other devices.

-) Added a new Binary Input channel that can be used to change the operation type (Heating, Cooling) for all rooms (needed for connections with Multi-heating actuators)

-) Implemented the Cooling function for Connections with Multi-heating actuators. A Multi-Heating actuator input can either be used as Heating-, Cooling- and Heating/Cooling-Request in combination with the RM.

-) Rooms with RF Radiator Valves will now send a Setpoint of 0°C if the RM is set to operation type cooling.

-) The Room-manager will no longer restart occasionally if it needs to send a lot of RF commands while under heavy operation of the sensor wheel

-) The text "operation modi" has been changed to "operation type" in the english language version

-) The Room inertance will no longer trigger false Setpoint changes before a time range that is invalid.


Bugfixes/Changes V39b BB04 Final vs. V39a BB06 Final:
*****************************************************

-) Added support for the new Sensor Hardware V15. This version can work with both sensor hardware solutions!

-) Fixed a bug that affected Marker 2-4 in combination with the Energy-ranges that caused logic operations to not work correctly
 
-) Removed the blank space in the ON/OFF text in CZ language to prevent bad display when changing the heating state of a room

-) Bugfix: Heating Sum state of a room will now only be ON if at least 1 HRV has a valve state >0%

-) Bugfix: Heating Sum state of all rooms will now correctly be calculated for all different room types.

-) Bugfix: Fixed connection problems between Bluetooth chip and RM that could cause connection interruption when using the coniugo BT modem or sending long SMS

-) Bugfix: External inputs will now correctly activate/deactivate the safety function

-) Change: If a MCH is conected the RM will now always send both RF commands if either set- or actual temperature changes

-) Bugfix: Activating/deactivating the safety function will now work properly if activating different zones 

-) Bugfix: The indices for window contacts of the different rooms will now be initialized correctly

-) Bugfix: The presence simulation that has been activated by a safety alarm will now be deactivated correctly when the arlarm ends.